Chlorine treatment for disinfecting pools
- Continuous disinfection
- Stable chlorine, lasts longer in the water
Slow-dissolving organic compound, stabilized, for the treatment of pool water.
|03154||CTX-300gr Clor Lent 1 Kg|
|03156||CTX-300gr Clor Lent 5 Kg|
|19195||CTX-300gr Clor Lent 25 kg|
INSTRUCTION FOR USE
Always adjust the pH before adding chlorine to the water, to make it as effective as possible.
Introduce the necessary dose of product inside the skimmers and then turn on the filter equipment; in this way the product will dissolve when it begins to move through the skimmers.
It is also possible to pour the dose of product equally over the surface of the swimming pool, preferably during
the evening and when there are no swimmers in the pool.
The level of free residual chlorine should be between 0,5 – 2 mg/l. This level is easily determined using a chlorine
and pH test kit, and should be measured at least twice daily.
Initial Treatment: Add 10 grs. of product for m3 of water. Wait for two hours before adjusting the pH level
between 7,2 – 7,6 using either Solid pH Reducer or Solid pH Enhancer.
The Initial treatment should be repeated whenever the water does not appear transparent.
Maintenance Treatment: Once the pH level of the water has been adjusted, add 1 or 2 grams of product
for m3 of water daily.
This dose is merely meant as a guideline and may be modified according to differing characteristics of the
pool or climate.