CTX-391 MultiAction 10 tablets 250g

Multiaction chlorine treatment for pool maintenance

  • Slow and continuous dissolution
  • Disinfection, anti-algae, algaestatic, flocculant, coagulant, chlorine stabilizer, anti-lime, metal remover, corrosion protection, pH reduction
Where to buy


Solid compound in bars, specially formulated to eliminate, in just one application, bacteria, virus and
micro-organisms in general. It also prevents algae from growing, keeps the water crystal clear and avoids lime
This product must not come into direct contact with swimming-pools made with polyester and vinyl or the
well-painted ones because it can cause discolorations.

CODE Description
75147 CTX-391 Multiaction 10 5 Kg
Show less

Instructions for use


Put the necessary dose in the skimmers; secondly, put the filtration equipment into operation. The product,
once water runs through the skimmers, will be dissolved.
It is essential that the whole amount of the swimming-pool water is purified daily.
The residual chlorine must range from 0.5 to 2 mg/l. This value can be easily measured by the test kits at least
twice a day.


Initial treatment: Add 15 grs. of ClorShock for m3 of water. Wait for two hours before adjusting the pH level
between 7,2 - 7,6 using either ctx 10 pH Minus solid or ctx 20 pH Plus solid.
The initial treatment will have to be repeated whenever you notice a lack of transparency in the water.

Maintenance treatment: Once we have the adjusted water pH, add a ctx391 multi action 10 for 25 m3 of
water every 7 or 10 days.

These doses are the ones suggested and can be modified according to the own characteristics of every
swimming pool, climate, etc.

Show less


Product data sheet


Safety Data Sheet

Show less