CTX Salt Test Strip
Analytical strips for use with salt-based chlorine generators
- For use with salt chlorine generators
Salt test strips for checking salt levels. Salt levels must be checked on a regular basis as the water is renewed.
| CODE | Description |
|---|---|
| 76646 | CTX Test for Salt |
INSTRUCTION FOR USE
01/ REMOVE
With dry hands, open cap and remove a foil-wrapped test strip.
Remove Test Strip from foil Wrapper
02/ DIP
For best results, use test strip away from skimmers or returns. Dip strip at wrist depth and remove with pads facing up.
DO NOT shake off excess water. Hold strip level for 25 SECONDS.
03/ READ
Compare to colour chart.
Match the three test pads on the test strip to the closest set of colour standards.
Complete colour match within 10 seconds, then discard test strip.• Read in order: FC pH TA CYA
Note: The water being analyzed should be within the IDEAL parameters listed on the back of the bottle. Keep the lid closed after taking out a strip to prevent moisture inside the container. ANALYZE TWICE A WEEK. STORE AT ROOM TEMPERATURE.