An underwater halogen projector made of plastic resistant to water and chemicals. Completely watertight thanks to a stuffing box assembly and neoprene seals.
The full kit includes an underwater niche, a flexible conduit, a sealing plate, a cover for the lens, a sealed casing for the projector with a 300 W, 12 V PAR56 bulb, or a 100 W, 11.5 V halogen bulb with a lifespan of 3,000 hours in the case of the extra-slim model.
Ideal for: Concrete, prefabricated and liner pools.
Added value: The bulbs have been designed to be used completely submerged in water. Certikin projectors have an edge over competitors. The exclusive accessories by Micallef for the niche and junction box enable non-standard lengths of conduit to be fitted.
The niche has a smart design that points the light 5 degrees downwards and, therefore, the projectors can be placed to light up a pool to maximum effect without blinding the people around it. The
cable size will depend on the length of the wiring between the transformer and the junction box.
For distances of up to 21 metres, a 1.5 mm2 cable is recommended. For distances of up to 34.5 metres, a 2.5 mm2 cable is recommended. The maximum recommended cable lengths will reduce the luminosity of bulbs by 10%. The maximum cable length between the transformer and the junction box is 5 metres.
Recommended use: This projector has been designed to be used completely submerged in fresh water pools. It is a class
III electrical appliance designed to be run from a safety extra-low voltage power source (12 V AC). For best results, it is recommended that a pool be lit up with one projector per 20 m2 of water surface. In
particularly deep pools, one projector per 25 m3 of water
In order to avoid glare, the projectors should be fitted so they face away from the house or in the opposite direction from which the pool is normally seen.
Should lighting be used in competition or training pools, the projectors should be fitted on the sides to avoid blinding swimmers.
To avoid emptying a pool for maintenance work, it is recommended that projectors be fitted in places that can be reached from the top edge of the pool.

  • Codes
Code Description Spare parts Documents BIM
PUP0001 Slim 100 W 12 V projector (with white ABS faceplate
Slim 100 W 12 V projector (with white ABS faceplate

Related