Change country
Spain France Portugal Italy
logo-sticky
Products Chemical Products for swimming-pools Anticalcareous
CTX-35 Descaler electrolyte cells
CTX-35 ANTICAL CELULAS ELECTROLITICAS 5L EN ES PT.jpg

CTX-35 Descaler electrolyte cells

Removes limescale that forms and sticks to electrodes and reduces electrochlorinator output and performance.

  • Extends the salt water chlorinator's life
Where to buy
back
CTX-35 ANTICAL CELULAS ELECTROLITICAS 5L EN ES PT.jpg

Description

Electrochlorinators (water disinfectant equipment based in salt electrolysis) are equipped with electrodes through which pool water circulates and where chlorine is generated.
Eventually, calcareous incrustations, organic rests and mineral sediments will form on the surface of these electrodes, even on those equipped with polarity change systems, and it will limit the performance of the equipment or lead it to malfunction. That's why it is necessary to properly clean the electrodes.
With this finality Ctx-35 has been developed. DESCALER ELECTROLYTE CELLS is an acid cleaner, ready to use and especially designed to eliminate scale formations without damaging the electrodes.

CODE Description
31127 5 l
Show less

Instructions for use

INSTRUCTION FOR USE

Set the electrodes in a container with the product so that it completely covers them, but without exceeding the top of the cell to prevent the attack of the product to the screws and nuts on the outside of the cell.
Let the product develop its cleaning action for some time.
Once finished the cleaning operation, thoroughly rinse the electrodes with water and set them again in the cell.
Attention: Check the manufacturer's instructions of your chlorine generator before to start cleaning the electrodes regarding the incompatibility of chemicals.

These doses are the ones suggested and can be modified according to the own characteristic of every swimming pool, climate, etc.

DOSAGE

Set the electrodes in a container with the product so that it completely covers them, but without
exceeding the top of the cell to prevent the attack of the product to the screws and nuts on the
outside of the cell.
Let the product develop its cleaning action for some time.
Once finished the cleaning operation, thoroughly rinse the electrodes with water and set them again in the cell.
Attention: Check the manufacturer's instructions of your chlorine generator before to start cleaning
the electrodes
regarding the incompatibility of chemicals.

These doses are the ones suggested and can be modified according to the own characteristic of
every swimming pool, climate, etc.

Show less

Documents

Manual

Product data sheet

  • Product Data Sheet CTX-35 Descaler electrolyte cells EN
    Download

Safety Data Sheet

  • Safety Data Sheet CTX-35 Descaler electrolyte cells EN
    Download
Show less