CTX-700 Descaler Super
Prevents limescale and iron stains.
- Prevents limescale formation on walls, ladders, bottoms and filters as a result of hard water.
- Keeps the water recirculation, pump, and heat-exchange circuits clean.
- Prevents stains forming on the basin as a result of iron in the water.
Ctx700 Antical Super controls the formation of limescale and stains due to iron in swimming pools. It can
prevent the formation of limescale on walls, stairs and pool bottoms due to hard water. It also avoids the
formation of stains in the glass produced by iron.
It keeps clean the water recirculation circuits, filters, pumps and heat exchanger that favors the filtration of the
Ctx 700 Antical Super is a non-foaming product, easy to use, which helps to keep the pool water clearer and
shinier. At the same time it is fully compatible with all disinfectants, algaecides and biocides (chlorine, oxygen,
anti-algae, etc.) of the CTX product range.
|03231||CTX-700 Antical super 5l|
INSTRUCTION FOR USE
Dilute the required amount of product in a container with water and spread the solution evenly over the entire
surface of the pool, keeping the filtration equipment running.
Initial Treatment: At the beginning of the bathing season, add 2 Lts. of product per 100 m3 of
water to the pool water.
Maintenance treatment: Add 1 to 2 liters of product per 100 m3 of water once a week.
In pools with hardness above 45°F and temperatures of 28°C, the product dosage should be increased by 25 to
Important: In all cases where the water contains iron, it is important to add ctx700 Antical Super to the pool
water before chlorination or any oxidizing treatment.
These doses are for guidance only and can be modified depending on the hardness and salt content of the