CTX-400 ClorProtect

Keeps water disinfected for longer

  • Prolongs the disinfectant action of chlorine
  • Supplement for salt chlorinator or unstabilized chlorine treatments
  • For outdoor pools
Where to buy


Compuesto destinado a prolongar la acción desinfectante del cloro en el agua de las piscinas.
Avoids the rapid destruction of chlorine, caused by the ultraviolet rays of the sun:
CI2 + 2H2O 2 HCI + O2

A) If a swimming pool with the appropriate quantity of chlorine is exposed to strong sunlight without the protection of ctx400 ClorProtect, the water will lose 90 % of its available chlorine within three hours.
B) If 4 kilos of ctx400 ClorProtect for 100m3 is added, the same water will lose only 30% of its chlorine in three hours.

CODE Description
73127 CTX-400 ClorProtect 4,5 Kg
Show less

Instructions for use


Always adjust the pH before adding chlorine to the water, to make it as effective as possible.
While the filtration equipment is in operation, place the required dose of product inside the skimmers or in the pump pre-filter.

Keep in the water an amount between 30-60 ppm of ctx400 ClorProtect.
The concentration of ctx400 ClorProtect does not have to be higher than 75 ppm. Once this concentration has been exceeded, part of the pool water will be emptied, replacing it with new water that does not contain ctx400 ClorProtect.


At the beginning of the swimming season add 4 kilos of ctx400 ClorProtect for 100m3 of water
(40 ppm of cyanuric acid).
These doses are the ones suggested and can be modified according to the own characteristics of
every swimming pool, climate, etc.

Show less


Product data sheet


Show less