CTX-575 Algae destroyer

Concentrated product that eliminates all types of algae, including resistant black algae.

  • Fast-acting, long-lasting
  • Non-foaming
Where to buy


This product is capable of eliminating green algae which is a type of algae that has a tendency to remain in suspension in the water, giving a green coloration, and also tends to adhere to the entire surface of the vessel. In addition, it is capable of removing brown, yellow and red algae that have a tendency to adhere to the walls and become entrenched in hard-to-reach areas. The yellow-brown algae usually spread over the entire surface of the pool walls and give a yellowish effect to the pool water. At the same time, it has the ability to eliminate black algae, which appear in the form of small isolated spots and are usually located in strategic and often difficult to access points. Traditional treatments are generally ineffective for their elimination.

Attention: This product is not recommended for liner and polyester pools since the accumulation of copper in the water can cause stains on the bottom and walls of the pool.

CODE Description
71653 CTX-575 Algae Destroyer 1 l
71654 CTX-575 Algae Destroyer 3 l
Show less

Instructions for use


This product should be added when there are no bathers in the pool and at dusk.
1. Turn off the filtration system.
2. Use a brush to vigorously scrape the affected areas.
3. Add the product to the affected areas.
4. Leave the product for 4 to 8 hours depending on the type of algae and brush again.
5. Turn the filtering system back on.
Repeat the process one week later if there are still traces of black algae.


Add 200 ml of product per 10 m³ of water depending on the type of algae and its proliferation.
These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.

Show less



Product data sheet

Safety Data Sheet

Show less