Change country
Spain France Portugal Italy
logo-sticky
Products Chemical Products for swimming-pools Chlorine disinfection Chlorine shock
CTX-200gr ClorShock granulate
CTX-200GR CLORSHOCK GRANULADO 1KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 1KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 5KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 25KG ES.jpg

CTX-200gr ClorShock granulate

Chlorine treatment for water recovery

  • Fast-dissolving
  • High water solubility makes it quick to obtain the necessary residual chlorine amount
  • Stabilized chlorine, long lasting action/protection
  • Does not modify pH
Where to buy
back
CTX-200GR CLORSHOCK GRANULADO 1KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 1KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 5KG ES.jpg
CTX-200GR CLORSHOCK GRANULADO 25KG ES.jpg

Description

Owing to its high solubility in water the required quantity of residual chlorine is rapidly obtained.
It is especially suitable for the disinfection of a pool made of polyester or vinyl because this product doesn't discolours these surfaces.
The ease with which it dissolves in water, means the disinfection of the pool water may be automated using a
metering pump.
The free residual chlorine obtained in the water offers higher stability against ultraviolet light.

CODE Description
03135 1 Kg
03137 5 Kg
10905 25 Kg
Show less

Instructions for use

INSTRUCTION FOR USE

Adjust the pH correctly before applying any product to maximise its effectiveness.
Introduce the necessary dose of product inside the skimmers and then turn on the filter equipment; in this way the product will dissolve when it begins to move through the skimmers.
It is also possible to pour the dose of product equally over the surface of the swimming pool, preferably during the evening and when there are no swimmers in the pool.
The level of free residual chlorine should be between 0,5 – 2 mg/l. This level is easily determined using a chlorine and pH test, and should be measured at least twice daily.

DOSAGE

Initial Treatment: Add 15 grs. of ClorShock for each m3 of water. After 2 hours, fix the water pH between
7,2-7,6 using ctx 10 pH Minus sólido or ctx 20 pH Plus sólido.
The initial treatment will have to be repeated whenever you notice a lack of transparency in the water.

Maintenance Treatment: Once the pH level of the water has been adjusted, add from 1-3 grams of product
for m3 of water daily.
This dose is merely meant as a guideline and may be modified according to differing characteristics of the pool
or climate.

Show less

Documents

Product data sheet

  • Product Data Sheet CTX-200gr ClorShock granulate EN
    Download

Manual

Show less