CTX-230 Dosilong

Multiaction chlorine treatment for pool maintenance

  • It guarantees a constant dosage, keeping the water disinfected with an algaecide and flocculating effect
  • Easy and ready to use
  • For pools without skimmer
Where to buy


Dispenser which contains disinfectant products, flocculants and algaecides for the maintenance of the
swimming pool water.
This dispenser prevents water from algae and maintains the pool water clear and transparent.

CODE Description
75149 Float
Show less

Instructions for use


Punch the circular marks (on both sides) from 50 m3 to 200 m3 of water depending on the swimming pool volume. Punch a hole in the round marks with a sharp object (for instance a scissors) and you will easily obtain the necessary holes for water to get inside it.
Attention: Don't refill this dispenser. It is for one use only.


Initial Treatment: Add 15gr of Clorshock for each m3 of water. Wait for two hours before adjusting the pH level
between 7,2 - 7,6 using either ctx 10 pH Minus solid or ctx 20 pH Plus solid.
The initial treatment should be repeated whenever the water does not appear transparent.

Maintenance treatment: Put the dispenser into the water and let it float.
Maintain a residual chlorine concentration between 0.5-2 ppm.

These doses are the ones suggested and can be modified according to the own characteristics of
every swimming pool, climate, etc.

Show less


Product data sheet


Show less